$6.95 FLAT RATE SHIPPING ON ALL ORDERS

Distressing Techniques

There are a lot of different ways to distress your piece and everyone has their preference. To get you started, we'll go over a few popular tools & methods in detail. We'll also give you some ideas of which other tools you could try.


You’ll probably find that one of these distressing techniques is going to become your go-to technique for most of your projects. Do keep in mind that you’ll likely get different results every time and the look you create might be very different from the examples. This is what makes it fun and interesting as you can truly create a unique look!


Keep this in mind before starting your project:

1) The best temperature to apply paint is room temperature. That’s also the best condition to let your paint dry. If it’s too cold or humid, the paint will take longer to dry, so just keep that in mind.

2) Try out the below techniques on “sample boards” so you can get familiar with them before using them on a piece of furniture.

Click here to read how to properly prep your piece before you start painting. And click here for a little step-by-step tutorial.


Wet-Distressing Technique

This is a popular technique for when you're layering colors, because you can use it to create a “natural” looking worn effect.

Here’s how to do it:

 

Step 1) The first coat

Apply one coat of paint to your piece; let it dry completely. We recommend letting the first coat dry for at least 24 hours when you are using the wet-distressing technique. Make sure that your first coat of paint is properly cured so that it won’t come off when you distress it.

Step 2) The second coat

Apply a second coat in a different/contrasting color. Wait about 1-2 hours until the paint is dry to the touch.

Remember that even though the paint feels dry, it’s still fresh and it hasn’t reached its full “hardness” yet. That’s what you’re taking advantage of when you’re using the wet-distress technique.

Step 3) Distressing

Once your final paint coat is dry, grab yourself a bucket of water and a lint-free rag or scouring pad (kitchen scrubby). Make sure that your cloth is nice and wet, but not so much that it drips. Use the wet rag to gently rub across the surface in a back & forth motion.

Make sure to apply only a little pressure at first, because you don't want to take off more of the paint layer than you intend. You can always apply more pressure if you’d like.

You can choose to distress only the edges of your piece or to distress it on the flat surfaces as well. Play around and have fun! What if it comes out too heavily distressed? No worries! You can always choose to cover with another coat of paint (same color as your second coat) and start the distressing process again.

Other tools & tips

Instead of the wet rag, or scouring pad, you can experiment using and wet/dry sandpaper!

The longer you wait, the harder the paint will dry. So, it’s best to not wait too long before you distress your piece! If you’ve waited too long and the paint has dried on too hard, then you can always use the dry-distressing technique!



Watch this video to see Rosanne wet distressing to reveal Lazy Linen beneath Vintage Cupcake!



To find out how to use multiple colors for a truly shabby-chic look, come see this tutorial!



 

Dry-Distressing Technique

This is a great technique to use when you’re using a single color on a piece of furniture and want to expose the original wood layer.

Simply follow these steps:

Step 1) First Coat

Apply one coat of paint to your piece; let it dry completely. If you're painting a piece made of raw or primed wood or MDF, then it’ll likely be ready for its second coat within an hour.

If you are painting a previously painted surface, then it's better to give the paint a good chance to cure. For laminated wood or a previous oil-paint layer, we recommend a light sanding before the first paint coat, and curing for at least 24 hours before applying your second coat.

Step 2) Second Coat

If needed, apply a second coat in the same color to get the desired amount of coverage. Wait about 1-2 hours until the paint is dry to the touch.

Step 3) Distressing

Once your final paint coat is dry, you can start distressing it with fine-grit sandpaper. You can start with 180 grit sandpaper to see how you like the look, but feel free to experiment with other grits. (The higher the number, the finer the sandpaper.) You just don’t want to use sandpaper that’s too coarse as it’ll leave visible marks on the undistressed parts of your piece!

*Instead of plain sandpaper, we’d suggest you’d try sanding sponges or a sanding block. These will be a lot easier to work with than plain sandpaper. They’ll also be less likely to leave visible marks on your surface.

Make sure to apply only a little pressure at first, because you don't want to take off more of the paint layer than you intend. You can always apply more pressure if you’d like.

Other tools & tips

Instead of using sandpaper, you can also play around with a palm sander, and even a paint scraper.

 

Watch this video to see Rosanne dry-distress a chair in our limited edition color, Summer Blueberries!



The "Resist" Technique

Use the “resist” method to create a chippy paint look. It’s super easy to do when you follow these steps:

Step 1) First Coat

Apply one coat of paint to your piece and let it dry completely. If you're painting a piece made of raw or primed wood or MDF, then it’ll likely be ready for its second coat within an hour.

If you're painting a previously painted surface, then it's better to give the paint a good chance to cure. For laminated wood or a previous oil-paint layer, we recommend a light sanding or even priming before the first paint coat, and curing for 24 hours before continuing on to the next step.


Step 2) Applying the “resist” medium

What you’ll do now is apply a “resist” medium in the places that you’d like the second paint layer to come off. Our medium of choice is our beeswax distressing bar. (You could also experiment with our natural wax, petroleum jelly, or candle wax.)

Rub the beeswax bar on a few sections of your piece. The wax is going to resist the second paint layer in those places and the paint will come right off when you distress it. Generally, you'll want to apply the beeswax to areas of your piece that would naturally get more wear and tear such as edges, corners, and any raised detailing.

Step 3) Second coat

After applying the beeswax, you can immediately apply a second coat in a different color. Wait about 1-2 hours until the paint is dry to the touch.

Step 4) Distressing

Once your final paint coat is dry, you can start distressing it with either a wet rag or fine-grit sandpaper. Try using a combination of these methods, and use both a wet cloth and a sanding sponge to create the look you want. (See more about these techniques in the wet-distressing and dry-distressing sections above).

You’ll see that the second coat will come off in areas where wax was applied to reveal the first coat of paint, giving it a distressed, shabby chic look!

 

Watch this video to see Rosanne resist distressing a chair to reveal Bliss beneath Cobblestone!

Looks like you're in . Go to our US Store ? Yes please. or No thanks.